To find your remote, please type the numbers on the back of your remote into our search bar



Linear GRD Digital Gate Receiver

Linear

Regular price $44.88

Shipping calculated at checkout.

Linear GRD Digital Gate Receiver 

The GRD has a single relay. It replaces two different Linear gate receivers, the DRG and the DRG-LV. The GRD is a digital receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The GRD2 will operate two gates, one gate and an obstacle sensor or channel one can open the gate and channel two can close the gate.
    All of the Delta-3 transmitters, including the two and four-channel transmitters, are compatible with the GRD. The Delta-3 radio format provides 256 different digital codes. The codes are set using the 8-position coding switches 310 MHz frequency in the units. In order to avoid the possibility of duplicating codes in adjacent systems, factory set codes should not be used. The receivers can operate from 16-24 volts AC or 20-30 volts DC and are normally powered from the gate operator. The relay contact(s) are rated at 5 amps @ 32 volts AC/DC NEC Class 2 circuit.
      The GRD has a "F" connector for attaching an antenna. The receiver is supplied with a 9-inch local antenna, a three foot 75 ohm coaxial cable, and a bulkhead connector for mounting the antenna outside the gate operator enclosure.

      Features:
      • For use with any Delta 3 transmitter
      • Activates one gate operator for access control
      • F-connector, antenna, coaxial cable supplied
      • 12 and 24 Volt models
      • Same as DRG (DNR00084) and DRG-LV

       

      The GRD is a 1-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The receiver uses the Delta-3 radio format, with 256 possible codes, set by dipswitch. Part Number: DNR00101

      Features

      • Auto voltage sensing – no jumpers to set
      • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
      • Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
      • Power: 12 – 30 VAC or 10.5 – 30 VDC
      • Codes: 256 (set by dip switches)
      • RF frequency: 310 MHz
      • Dimensions: 3.625″ W x 5.25″ H x 1.5″ D

      DOWNLOAD