To find your remote, please type the numbers on the back of your remote into our search bar



Linear MGR 2 MegaCode 2 Channel Gate Receiver 318MHz

Linear

Regular price $49.88

Shipping calculated at checkout.

Linear MGR 2 MegaCode 2 Channel Gate Receiver 318MHz

The MGR-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. Up to 40 transmitters can be programmed into the receiver.Features

  • Stores up to 40 MegaCode transmitters
  • Uses a frequency of 318 MHz and features over one million radio codes to all but eliminate any possibility of code duplication.
  • Auto voltage sensing - no jumpers to set
  • Two Form "A" (normally open) relays rated at 30 Volts AC/DC up to 5 Amps each
  • Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Dimensions: 3.625 x 5.25 x 1.5 inches

The MGR-2 is a 2-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The MGR-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the MegaCode radio format with over a million possible code combinations. Up to 40 transmitters can be programmed into the receiver. Part Number: DNR00105

Features

  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 12 – 30 VAC or 10.5 – 30 VDC
  • Codes: 1,000,000+ (MegaCode format)
  • RF frequency: 318 MHz
  • Dimensions: 3.625″ W x 5.25″ H x 1.5″ D

DOWNLOAD